Diller
  • türkçe
  • english
  • russian
Ürünler Başlık

Products

Classical Conveyor

Classical Conveyor

Classical Conveyor

Conveyor belt is a transport system that has widest application area because of being cheap, efficient and easy to maintenance and control in terms of carrying of bulk materials in Mining, Cement, Iron and Steel, ports or other facilities. Its main advantages are listed below:

1. Carrying capacity: It is able to uninterruptedly carry the materials up to the capacity of 10.000 m3/h.

2. Route adaptation: It has the capability to carry the materials in the shortest route easily and economically by overcoming the possible obstacles occurred between the loading and unloading area.

3. Storage property: It is able to work compatible with staker and reclaimer systems in stockhalls.

4. Process Control: Conveyor belts, in terms of process, are convenient for the required controls such as dosing, weighing and metal separation.

5. Environmental factor: Conveyor belts run quietly and do not cause environmental pollution in the transport area. However, unloading areas are required to be de-dusted.

6. Safe operation: Running and maintenance of the conveyor belts can safely be done with a couple of staff. The maximum safety can be ensured thanks to the rope-pull emergency stop along the belt, rotation monitor in the idler drum, level measuring device for the blockages in the unloading point and conveyor belt switches.

7. Energy cost: Conveyor belts offers very lower transport cost per tone of the transported material compared with the high frictional or pneumatic systems such as chain conveyors.

8. Maintenance cost: The parts on the conveyor belt are maintenance friendly because of being smaller than its alternatives. The demand for spare parts is really low in terms of its variety and quantity and the required spare parts are cheaply supplied in a short time.

Conveyor belts can be straight and inclined according to place of use and have also various implementation areas according to the driving unit and take-up unit. There are various standards according to the belt width.

Conveyor belts mainly consist of the following parts.

- Carrying rubber belt

- Driving drum and driving group

- Tail drum

- Carrying idler set station

- Return idler set station

- Impact idler set station

- Top and bottom guide idler set station

- Feeding tank

- Unloading hood and chute

- Cover

- Belt cleaner

- Return cleaner

- Counterweight take-up unit

Gallery